Step 1: turn off the Kitchen faucets, remove the handle from the bottom of the faucet, remove the top or back of the faucet. Some screws are hidden under the metal buttons, plastic buttons or plastic sheets, these buttons or plastic cards are inserted or screwed into the handle. You only need to turn on the button and you will see the top of the screw installed on the handle. If necessary, use some of the oil to tighten WD-40 and other specifications.
Step 2: remove the handle, check the Bathroom Sink Faucets parts. Big carp pliers or adjustable wrench to remove the packing nut, be careful not to leave scratches on the metal. When you turn the rotating direction of the cock to the valve core or close it, open the cock.
Step 3: remove the fixed screw washer. If necessary, the use of lubricating screw penetrates into the open pine. Check valve and screw, if there is any damage to the replacement of the new.
Step 4: replace the old washer with a new washer. The new washing machine is almost complete with the old washing machine matching, generally no longer need to drop. You must pay attention to the old washing machine is equipped with an inclined plane or plane, and replace with a new washer. Only the design of hot water in the hot water flow through the washing machine will plug the hot water outlet of the violent expansion, the flow is slow. Some washing machines can work in hot and cold water, but you should make sure you buy a replacement washing machine that turns out to be two peas.
Step 5: the new washer fixed on the spool, and re install the various parts of the Cheap Faucets Online. Clockwise rotating valve core. Spool position, re install the sealing nut. Be careful not to allow the wrench to leave scratches on the metal.
Step 6: reinstall the handle and back button or disk. Re open the water supply, check whether there is leakage
Visit www.faucetsmarket.com/ for more about costly and designer faucets as you can choose from the wide selection of cheap led faucets on the market.